Installation of your custom blinds and canvases

Installation roman blinds

INSTALLING YOUR BLINDS IS EASY!

INSTALLATION GUIDE

ROMAN BLINDS

Classic Option

PREPARATION

Before you start installing your blind, make sure the screws are suitable for the surface you'll be screwed into. Some surfaces may need different plugs and screws than those we provide.

INSTALLATION INSTRUCTIONS

1- Type of Installation

Placing the brackets. Options: 'Ceiling' or 'Wall Mount' fixing as shown in Fig. 1 ('Ceiling' typically used for recessed ceiling and lintel installations).

2-Bracket Fixing

Mark with a pencil where brackets should be fixed, about 5 cm (2 inches) from each side. Avoid fixing over blind mechanisms. Larger blinds require all supplied brackets, evenly spaced across the headrail's width.
See Fig. 2. Attach a bracket at each mark.

3- Hook, Tilt, Click

When brackets are fixed, hook the front ridge of the cassette onto the bracket fronts, then push and tilt the cassette back until it clicks into the bracket rear. Repeat until all brackets secure the cassette ( blind ).

OPERATING YOUR BLIND

1- Chain Guard: To lower fabric, gently pull down on the chain. Use the opposite chain to raise the fabric.

2- Manual Wand: To engage the mechanism, turn the wand gently left or right. Pull the bottom of the wand down to operate. Twist wand in the opposite direction to raise the fabric.

3- FloRise Cordless: Gently pull the product base down to desired height, then release. To raise, pull the base slightly down to disengage the gear, then release. The fabric will rise automatically.

4- Motorized Blinds: Refer to the specific operating guide provided with your product.

REMOVING THE BLIND

Unclip from Brackets

Push the button on the front of the bracket. Tilt the headrail towards you and gently ease it out of the brackets.

CLEANING INSTRUCTIONS

Use a dry, lint-free cloth to wipe the blind's fabric.

Download our installation guide Format: PDF

All of our blinds are super easy to install, you can simply do it yourself.

Cassette Option

PREPARATION

Before you start installing your blind, make sure the screws are suitable for the surface you'll be screwed into. Some surfaces may need different plugs and screws than those we provide.

INSTALLATION INSTRUCTIONS

1- Type of Installation

Placing the brackets. Options: 'Ceiling' or 'Wall Mount' fixing as shown in Fig. 1 ('Ceiling' typically used for recessed ceiling and lintel installations).

2-Bracket Fixing

Mark with a pencil where brackets should be fixed, about 5 cm (2 inches) from each side. Avoid fixing over blind mechanisms. Larger blinds require all supplied brackets, evenly spaced across the headrail's width.
See Fig. 2. Attach a bracket at each mark.

3- Hook, Tilt, Click

When brackets are fixed, hook the front ridge of the cassette onto the bracket fronts, then push and tilt the cassette back until it clicks into the bracket rear. Repeat until all brackets secure the cassette ( blind ).

OPERATING YOUR BLIND

1- Chain Guard: To lower fabric, gently pull down on the chain. Use the opposite chain to raise the fabric.

2- Manual Wand: To engage the mechanism, turn the wand gently left or right. Pull the bottom of the wand down to operate. Twist wand in the opposite direction to raise the fabric.

3- Slow Rise Cordless: Gently pull the product base down to desired height, then release. To raise, pull the base slightly down to disengage the gear, then release. The fabric will rise automatically.

4- Motorized Blinds: Refer to the specific operating guide provided with your product.

REMOVING THE BLIND

Unclip from Brackets

Press the release tab on all brackets. Tilt the cassette forwards and ease it out of the brackets.

CLEANING INSTRUCTIONS

Use a dry, lint-free cloth to wipe the blind's fabric.

Download our installation guide Format: PDF

All of our blinds are super easy to install, you can simply do it yourself.

ADVICE FOR YOUR WINDOW COVERING INSTALLATION

Loading...
Popup6
Popup7
Popup8
Popup9
Popup10
Popup12